Any one could help?
↧
i am suing Kingston KTH-PL421/16G 16GB 288 Pin DDR4 2133MHz ECC Registered memory in Intel S1200SPL board, and did not boot up, can help??
↧
Re: i am suing Kingston KTH-PL421/16G 16GB 288 Pin DDR4 2133MHz ECC Registered memory in Intel S1200SPL board, and did not boot up, can help??
No, this is a community support forum for Intel products.
Doc
↧
↧
Re: DQ87PG setting up raid
You changed the SATA Mode to RAID, saved the configuration and exited Visual BIOS and then did CTRL-I during the subsequent BIOS POST?
↧
Re: 起動しない It doesn’t start
This is telling you that the Compute Stick is not receiving enough power to support O/S boot. You need to connect the original power cord and A/C adapter in order to use the Compute Stick.
...S
↧
Re: Job crashes, error file is empty
Hi Amit,
We understand your concern. We are trying our best to help you.
We just wanted to bring to your kind notice that we have not ignored the issues on missing python errors.
As mentioned in mails, Jupyter hub session time limits could create empty log files i.e, errors may not be written to the log files, if the session gets timed out.
If you face the same issue with putty/ssh, kindly send us the <JOB_SCRIPT>.o<JOB_ID> and <JOB_SCRIPT>.e<JOB_ID> files of the job run suggested during the discussion.
Thank you.
Regards,
Aswathy
↧
↧
Copy process / connection break down when sending files over 9260 card
I have the following issue with an Intel 9260 wifi card. The moment I send (larger) files into the LAN (for example samba or Windows 10 network share), the copy process of Windows explorer (with a high chance, does not happen every time, but with a very high chance):
- goes to 0kb/s then jumps up again after some time or
- Windows gives an internal network error (Wifi driver seems to crash)
While this happens, and having a permanent ping open next to the copy, the moment the copy breaks down, the Acces Point isn't reachable anymore:
The images show, that after 1-2 seconds of the copy process, the copy rate drops to 0, in this moment the access point isn't reachable anymore via ping. If I'm lucky, like in this picture, after a short period of time, it goes slowly up again. But I also had it happen too now very often, that the ping breaks down into "internal network error" and the copy process is abrupted. The wifi driver mostly crashes at this moment, and Windows tries to reload the driver.
I tried two access points, and it happens on both of them, so the issues seem to lay in the Intel card or its drivers. I am using the latest available drivers for the 9260 card and Windows 10 64bit, version 20.60.0.
Receiving files work without an issue, from the LAN to the 9260 card. This issue just happens, when I send away files from the laptop, into the LAN.
The connection is 866Mbit (2x80Mhz). I tried two separate access points, both show the same behavior.
Edit:
I just noticed that I can randomly crash the Access Point by this (after some tries, copying a large file over the LAN, the access point would restart randomly)
I can see this behavior on two different routers/access points. One is a Linksys WRT1200, another a totally different model and brand by a totally different manufacturer (AVM FRITZ!WLAN Repeater DVB-C).
↧
Re: 82574l gigabit adapter limited to 100Mbps
Hello Saravana_CSB,
Thank you for posting in Intel Wired Ethernet Communities. This issue involves an embedded Ethernet controller. Have you checked with Intel Embedded Community on this issue? Please ask in Intel Embedded Community for assistance. Please let us know if you have any other questions.
Best regards,
Daniel D
Intel Customer Support
Agent under contract to Intel
↧
Re: XL710 QDA2 link not detected.
Hello Prakashkurup7,
We would like to help you with this issue. Please inform us if you have not resolved the issue. If you have any questions please let us know..
Best Regards,
Daniel D
Intel Customer Support
Agent under contract to Intel
↧
Re: "Present Screen" video issue on hub.
Hello,
i installed latest Intel Unite app version and issue still exist.
I am looking forward for any help.
Krzbes
Computer Profile Summary
| Computer Name: | XPR20611 (in WORKGROUP) |
|---|---|
| Profile Date: | poniedziałek, 23 lipiec 2018 12:15:14 |
| Advisor Version: | 8.6 |
| Windows Logon: | Administrator |
| Windows 10 Professional (x64) Version 1803 (build 17134.167) Install Language: Polski (Polska) System Locale: Polski (Polska) Installed: 23.07.2018 12:06:25 Servicing Branch: Current Branch (CB) Boot Mode: UEFI with Secure Bootdisabled |
| Asset Tag: Default string Chassis Serial Number: Default string Enclosure Type: Desktop |
| 3,40 gigahertz Intel Core i5-7500 256 kilobyte primary memory cache 1024 kilobyte secondary memory cache 6144 kilobyte tertiary memory cache 64-bit ready Multi-core (4 total) Not hyper-threaded |
| Board: ASUSTeK COMPUTER INC. PRIME H270-PRO Rev X.0x Serial Number: 171115516100814 Bus Clock: 100 megahertz UEFI: American Megatrends Inc. 1205 05/03/2018 |
| 499,46 Gigabytes Usable Hard Drive Capacity 472,76 Gigabytes Hard Drive Free Space Samsung SSD 860 EVO 500GB [Hard drive] (500,11 GB) -- drive 0, s/n S3Z2NB0K374466A, rev RVT01B6Q, SMART Status: Healthy |
| 16328 Megabytes Usable Installed Memory Slot 'ChannelA-DIMM1' is Empty Slot 'ChannelA-DIMM2' has 8192 MB (serial number 1C33ACFC) Slot 'ChannelB-DIMM1' is Empty Slot 'ChannelB-DIMM2' has 8192 MB (serial number 1C33AE99) |
|
| None detected |
| ||||||||||||||||||||||||
|
| Intel(R) 300 Series Chipset Family SATA AHCI Controller |
| NVIDIA GeForce GTX 1050 [Display adapter] BenQ GL2250H [Monitor] (21,7"vis, s/n N1G00734019, styczeń 2016) |
| Kontroler miejsc do magazynowania firmy Microsoft ASMedia USB 3.1 eXtensible Host Controller - 1.10 (Microsoft) Intel(R) USB 3.0 eXtensible Host Controller - 1.0 (Microsoft) |
| NVIDIA High Definition Audio Realtek High Definition Audio |
|
| None detected |
| ||||||||||||||||||||||||||||||
| BenQ GL2250H-4 (NVIDIA High Definition Audio) Realtek Digital Output (Realtek High Definition Audio) Systemowe oprogramowanie układowe Urządzenie wejściowe USB (2x) Urządzenie klawiatury HID [Keyboard] Mysz zgodna z HID [Mouse] Fax Główna kolejka wydruku Microsoft Print to PDF Microsoft XPS Document Writer Microsoft Radio Device Enumeration Bus Syntezator SW Microsoft GS Wavetable Główny koncentrator USB (USB 3.0) (2x) |
| None detected |
| None detected |
|
Hotfixes from Windows Update (agent version 10.0.17134.137) install automatically. Last install: 23.07.2018 11:55:55, check: 23.07.2018 12:14:00. All required security updates have been installed (using Advisor definitions version 2018.7.13.2) according to the 07/10/2018 Microsoft Security Bulletin Summary and bulletins from other vendors. |
|
|
↧
↧
Re: Output of a program while
Hello,
Thanks for reaching out to us.
After submitting the job, the output will be written in below format from the path where you have submitted the job
<JOB_SCRIPT>.o<JOB_ID> and <JOB_SCRIPT>.e<JOB_ID>
Please check and let me know for further information.
Regards,
Dilraj
Please check and let me know for further information.
Regards,
Dilraj
↧
Re: SNMP on server board SP1200SPLR
Hello kimm,
I hope that MRTG Support can help you.
Also for the Intel SGX can be found on the following link.
https://downloadcenter.intel.com/download/27963/Intel-Software-Guard-Extensions-Intel-SGX-Driver-for-Windows-
I will proceed with closing the threat and if you have any question please feel free to open a new threat.
Best regards,
Henry A.
↧
Re: Internal server error
Hello,
Is the internal server error resolved? Kindly check and confirm back to us.
Thanks,
Dilraj
↧
Re: Connection closed when connecting to Colfax
Hello,
We have not received any response. Could you please share the procedure you followed and also share the screenshot for the same for further investigation.
Regards,
Dilraj
↧
↧
Re: Additional datasets request
Hi
As we haven't received any response we are closing this thread.
If you have any other issue,Please raise a new thread
↧
Re: 32GB DIMM for Intel R1304BB4DC
Hello alex9,
I will like to follow up on your threat.
If there is anything else we can help please feel free to ask.
Or if you don’t have any further questions, if I am allowed to close the threat.
Best regards,
Henry A.
↧
Re: Cannot connect to a device using Intel Manageability Commander
Hello amankahlon888,
I will like to follow up on your threat and verify if the there is anything I can be of help.
If the use of another SCCM version helped.
Best regards,
Henry A.
↧
Re: NUC8i7HVK - "A bootable device has not been detected." despite SSD inserted and OS installed
Not sure if it's the same issue, but I had a similar problem upon updating the BIOS from version 29 to 40. The reason for me was for some reason with update 37 intel removed legacy boot, rendering my non-UEFI drives unbootable. I'm guessing it was a legacy stability issue, as the reason I updated in the first place was because legacy PXE boot was freezing and displaying a blank screen right after getting a DHCP response.
I probably would have thought twice about buying this had I known non-uefi booting wasn't an option. I use pxe for ghosting and uefi network boot is a nightmare to configure server-side.
I'm going to revert to bios 0034 and see what happens (was originally on 29)
↧
↧
Re: Firmware upgrade for Cisco branded Intel X710-DA4 adapter
Hello JaroslavJ,
Thank you for posting in Intel Wired Ethernet Communities. For a Cisco OEM X710 adapter we do not recommend using NVM update from Intel to update to version 6.0.1. Please contact Cisco support; they may provide you with a release date for their NVM update to version 6.X. Please let us know if they resolve this issue, or you have any other questions.
Best Regards,
Daniel D
Intel Customer Support
Agent under contract to Intel
↧
Re: Brightness Flickering in Photoshop with dual Graphics cards HD630
I've tried all adobe's ideas. The only one idea can help iscompletely disable the graphics processor. But it makes my Photoshop works slowly without graphics processor.
As long as i choose nvidia graphics for Photoshop the screen will flicker in it and neither i choose intel or nvidia graphics the screen still flicker in Adobe Camera Raw.
I've tried to install both intel and nvidia's latest drivers. And uninstall them, install lenove's latest drives. Neither drivers can't slove this issue.
I really hope intel can work with this problem. Adobe said this is not their fault, intel said this is not their fault and nvidia said this is not their fault, at last it can't really solve the issue. It makes customers feel helpless and disappointed.
Why i think intel can solve this issue. Because i try an intel graphics old driver (21.xxxx, the newest is 24.xxx) . It really solved the flickering issue in Photoshop, but it still flickers in Adobe Camera Raw. So it shows intel's driver has ability to solve this issue.
↧
Re: Stream Depth And Y16 Simultaneously?
Intel advises against using Y16 in an application because it is unrectified and intended for use in camera calibration.
Re: IR Y16 vs Y8 Brightness and "Noise"
Y16 is also very limited in the modes that it can be used in. And each time that depth is enabled, Y16 mode is 'ghosted out', making it unusable for your goal of streaming both IR and depth. Below are the IR-only modes in which Y16 will operate.
1920x1080, 25 FPS, with depth stream disabled
1920x1080, 15 FPS, with depth diabled
960x540, 25 FPS, with depth disabled
960x540, 15 FPS, with depth disabled
*******************
You can however stream IR and depth together with Z16 depth and UYVY IR as an alternative to using Y8 for the IR.
If you are interested in depth post-processing, the paper linked to below may be useful.
↧