Re: Help I2C dosen't work with accelerometer ADXL345
Jacen, maybe it help if you double check my blog a while back on getting the BMP180 via I2C running, my issue was MRAA and getting the I2C pins activated the right way ... BMP180 on I2C with mini...
View ArticleRe: Has anyone been able to get neopixels to work with the edison?
have you already NeoPixels up and running? I might be able to dig into it over the weekend ...
View ArticleRe: D54250WYK IR not working on Windows 8.1
So I tried disabling the IR in the BIOS and rebooting. I then re-enabled it and re-ran the driver install for version 2.9.1007 for Windows 8.1 and this time it has installed and the remote is working...
View ArticleRe: Multiple servo controlling issues on Edison Arduino board
Hi CMata, Actually i can not use the servos properly. I need to go through your document more deeper and test it out . I investigate the issue more than 2.5 weeks long without positive result. Now i...
View ArticleRe: 7260 driver version 17.13.11 doesn't work
Yes it did. But the 7260 wireless driver provided by Dell is older than the latest driver in the Intel's site. It worked not reliable with AP at my work and it even made AP at my home to stuck. At home...
View ArticleRe: Motor driver Conrad-Miniatur-Fahrtenregler not working with intel galileo
hi, i was able to solve this issue i just used 5v from my galileo and readjusted the powersource to 12 volts and it started working so the above code is correct RegardsAnnu shah
View ArticleRe: rste uninstall
David, The server is a Lenovo TS440 with one single processor (Intel Xeon CPU E3-1245 v3 @ 3.40 GHz (8cores)) and Intel(R) C600+/C220+series chipset SATA RAID Controller. 16GB or RAM. 4 500GB SATA...
View ArticleRe: SPI + Edison Mini breakout board + MRAA on IoT devkit
Hi LuigiC Were you able to use SPI successfully? Regards;CMata
View ArticleRe: Suggestions on using audio speakers with Galileo
hi rgb, Thanks a lot for your suggestion. espeak is now working fine with the Alex's version of image. I just want to confirm that this image does not work with Arduino is it? --Paridhi
View ArticleRe: I am trying to install the MEI driver for my system.
Thanks a lot guys. Reinstalling the OS worked.
View ArticleRe: Intel Galileo 1 unidentified component half-broken
I don't have the ability to open the board design files but it looks to me like the 32KHZ crystal http://www.mouser.com/ds/2/137/1697497-472682.pdfI am sure that is used for the RTC. While there would...
View ArticleRe: Intel Edison and 4G/LTE modem?
Hi No unfortunately not... still waiting for some other solution to come up.May be Qualcomm would make available board for their new Cargo project or Intel with Arduino will get new shield... it is...
View ArticleRe: WiDi Connection Dropped after 10 minutes
We can take a look at the WiDi runtime logs.Please see your Private Message inbox.
View ArticleRe: [bug] DN2820FYKH will not deactivate IR in BIOS
Hi all, Apologies for the confusion. The original report in this thread was: "I deactivated the NUC's consumer IR interface in the BIOS (vers. 0047). But the NUC still comes on when the Philips' on/off...
View ArticleRe: WiDi stopped working on Lenovo Yoga 2 Pro using Screencast ... Anyone...
Well .... If you complain enough, and poke around enough, you find the solution ..... On the Yoga ... Open Network and Sharing Center > Change Adapter Settings > WiFi (in my case a Netgear75)...
View ArticleRe: Intel 520 performance drop with old data
Hello HalloMal, In this case we will investigate and will advise as soon as investigation is done. Please bear in mind that this investigation may take a while. If you have any additional information...
View ArticleRe: How do I verify Quick Sync is working?
Hello, I was able to get Quick Sync working. It took me some time to figure it out (BIOS changes and such), but it is now working. Thanks! ___Bibbit
View ArticleRe: DZ77GA-70K board running RAID 1. Raid goes RAW, Disks test good.
Kevin, Thanks for your attention to my problem. By RAW I mean that in Windows Computer Management/Disk management, the file system shows as RAW, rather than NTFS. When this happens Windows considers...
View Article