Clik here to view.
s2600cp4 server board make loud noise for cpu fan. I am using other chasis. I...
s2600cp4 server board make loud noise for cpu fan. I am using other chasis. I have updated the FRUSDR but still fan make too much noiseI am using Intel Thermal Solution Cooling Fan for E5-2600...
View Article7260AC keeps dropping out, crashing laptop, forcing reboot?!
Dell Inspiron 17R SEWindows 7 SP1 x64PROSet 17.1.0 (driver 17.1.0.19) I have a 7260AC adapter in my laptop connected to a Virgin Super Hub 2ac via the 5GHz band @ 300Mbit and has "excellent" signal...
View ArticleRe: unknown device: NUC D34010WYK
In device manager, right click on the unknown device.Properties -> Details -> Hardware IDs With the hardware IDs, you should be able to search online and figure out what the device is. Or share...
View ArticleRe: How best proceed with overheating i7-4790K?
I am having the same issue. I have the 4790k in the GA-Z97X-Gaming 5. Occt fails immediately due to the heat of the processor. I am not an over clocker and have it all stock. I have updated the bios of...
View ArticleRe: How best proceed with overheating i7-4790K?
My batch is L421B951as well. Hope it helps. I would like a solution to this issue. My processor is not even a month old.
View ArticleRe: Firmware Edison IoT Edition
After trying to do a wget to my host, I realize you are correct. I cannot do any wget's from my Edison. However, I just did some test wget's from two other Linux computers on my same home network OK,...
View ArticleClik here to view.
problem with processor diagnostic tool
Hello, i have a problem with processor diagnostic tool ( front side bus unsuported , QPI unsuported and IGD detection test not found ect ...) ------------------------------ Testing Processor 1...
View ArticleRe: ubilinux (Debian) now available from Emutex Labs
Thanks faceplant. That solved this issue although I get a segmentation fault with the blink example.
View ArticleRe: Firmware Edison IoT Edition
Here is the line I commented out of "/etc/wpa_supplicant/wpa_cli-actions.sh" based on a post on the Edison forum to make a static IP address: # udhcpc -i $IFNAME -p /var/run/udhcpc-$IFNAME.pid...
View ArticleClik here to view.
Re: Edison w/ Breakout Board - How to Flash
Booted dual cables as per my steps: Windows Device Manager only reports the console's COM3 Port.Tried with a single cable (J16) as shown in your picture, no drive or other ports.Added second cable...
View ArticleRe: Intel AC7260 problems
Shadow, I can certainly tell you that you do NOT need an AC router to use this card. I'm having issues with it too with an AC router. Just wanted to help clarify that for you.
View ArticleClik here to view.
Re: Support for the Adafruit 2.8" TFT display for Arduino Edison
Sort of an FYI and question: For the fun of it I picked up a Galileo Gen 2 to see how will it performs. I plugged in the Adafruit 2.8" display using my updated driver and tried out the graphic test...
View ArticleRe: How can i improve SPI speed?
So a couple of days ago I received my Galileo 2, I have been playing around with my Adafruit_ILI9341 library and it works, but I am finding the SPI clock speed to be something like: 39us or about...
View ArticleDE3815TYBE Custom Solutions Header
Hello, I intend to deploy a DE3815TYBE NUC and add a HDMI-CEC adapter using the custom solutions header (https://www.pulse-eight.com/store/products/117-internal-hdmi-cec-adapter.aspx)According to the...
View ArticleRe: How to remove softblocks on Edison w/ Breakout board
An update for those looking at the unknown soft blocks blocking their wlan0 from working. I eventually unseated and reseated the Edison Module to the mini breakout board. On rebooting the Edison, the...
View ArticleClik here to view.
Re: i7 4790K temperatures
Seems to pass fine. Lower temperature than even the XTU test. According to HWMonitor, the max package power is around 60W for your ITT, while for the XTU it's around 80-90W. When you run the small...
View ArticleRe: Is the "gray NUC" (Celeron version) compatible with Windows Server 2012...
I would like to state what I did following your example as it didn't quite turn out right with your directions, maybe from the age of it. But I have a DCCP847DYE NUC and installed it in "classic mode"...
View ArticleRe: Error when i play arma 3, need to know how to downgrade driver.
I'm having the same problem man and it's a pain, I don't know how to do this I just want to play the game! we need help please! anyone!
View ArticleRe: next step: Bluetooth Low Energy and SensorTag - running!
Thanks Fab-Lab! After opkg update, I needed to run opkg install bluez5-dev to get noble installed (Otherwise I get bluetooth Header file errors).
View Article