Servo Library Conflicting with Wire Library
Hello, I wish to control a servo motor as part of a project I have been working on. I first tested the Servo Library with the "Knob" example and this uploaded and worked perfectly. However, when I try...
View ArticleRe: Intel Galileo OneWire and Dallas Temperature Arduino Code not working
Thank you JP and Alex for your responses. I did not get the sensors to work directly from the galileo but instead have chosen to use another arduino to get the temperature sensor readings. It seems...
View ArticleRe: USB 3.0 external Hard Drive not detected after computer starts up, USB...
yes this happens even with the latest drivers from the intel site. the funny thing is the readmes show the same driver version of 2.5.3.34. However the HP download shows a release date of Dec 2013...
View ArticleRe: Intel Galileo OneWire and Dallas Temperature Arduino Code not working
I wrote on this forum and on my blog about how you can reliably read from Dallas 1-Wire sensors using the UART capabilities of Galileo.Like I often say, Galileo is a computing system, not a processor,...
View ArticleRe: HD Graphics 4600 and OpenGL issue i5-4690K - workarounds/fixes?
Hi Apartington, Would it be possible to get a binary of the app so we could debug the issue? ThanksRobert
View ArticleClik here to view.
Re: Intel Galileo OneWire and Dallas Temperature Arduino Code not working
Try something like this. You will be able to assign two pins for input and output. This diagram is for the Ping sensor, but this method can be applied to any three pin sensor.
View ArticleRe: DN2820FYKH blank screen at boot
Thank you for the feedback allan_intel. I also think the memory is the key issue. But in the same page you mentioned, they say the NUC will run 1333 and 1600 memory at 1066. I now bought crucial 4gb...
View ArticleIntel X520 (82599) Virtual Functions on FreeBSD 8.3/10
I've run into a one-way transmission issue with FreeBSD and Virtual Functions on an Intel 10GbE X520. So far we've tested: Ubuntu 12.04 LTS CentOS 6.5 pfSense 2.1 / FreeBSD 8.3 pfSense 2.2...
View ArticleArma 3 dxgi_error_device_removed
Hello I am receiving this error when playing arma 3 atlis life. I've read through several forums and the only solution I have been able to find is downgrading the driver to 9.17.10.2932 ( source Re:...
View ArticleClik here to view.
Re: USB wireless adapter on NUC 54250WYKH
Thanks for joining the NUC community.I understand you need to reconnect the USB 3.0 wifi adapter in order to detect it. Please try updating to the latest USB 3.0 drivers; they are available at the...
View ArticleRe: Intel AC7260 problems
Hi Eric. Ive been using my centrino n-1000 since June with no problems since intel cant get this new chip to work right. I wanted a dual band card so I ordered an intel 6205 card off of ebay and will...
View ArticleRe: NUC 2820 BIOS issue
Thanks for the update. I am glad your computer is working now. Allan.
View ArticleRe: Where do I get a Galileo Gen 2 board
Now we just need a buy button ;-) I got a reply from Mouser, but the person didn't understand my question and referred me to the original Galileo. I have clarified and hope to get more info from them....
View ArticleRe: NM10 Chipset SMBus(s)?
Hello MSumulong, thank you very much for contacting us through Intel Communities.I’m going to make some research on the information you are requesting. Would you please provide me the model number of...
View ArticleRe: Where do I get a Galileo Gen 2 board
I suspect that it's hard to find Gen 1 boards because Gen 2 is meant to replace Gen 1, so retailers are not restocking Gen 1. I'm hoping Gen 2 gets more visibility as well.
View ArticleRe: New Bluetooth driver 17.1.0 doesn't get installed
Hi rambomhtri, Let me help you with this. It is important to mention that updates include fixes for some issues so when there is a new update it does not necessarily mean you computer needs it but try...
View ArticleRe: Official Black-screen thread - We need your help!
Hello, Are you willing to send your system to us? No. But you may contact me for a remote session to see the problem live in actionIs your system a laptop or desktop? DesktopIf desktop, is it custom...
View ArticleRe: Re: Antenna wires on NUC 54250WYKH
Thanks Kevin. I tried the U-APSD change, setting the property to disabled on the driver and then restarted. No change was noticed. Still seeing 130 mbps instead of the 867 mbps that my external...
View ArticleRe: USB 3.0 external Hard Drive not detected after computer starts up, USB...
@TesnX, yes, that would work for your system with Windows 7 and Intel® USB 3.0 eXtensible Host Controller, please try the driver and let me know your findings. Intel® Download Center Allan.
View ArticleClik here to view.
Weird problem with X540-AT2 and Cisco switches
Hello, I'm having a weird problem with two servers using Supermicro 9SRH-7TF boards and the onboard Intel X540-AT2 based ports. The ethernet ports come up as 100mbps/full duplex. This is happening with...
View Article